Versatile profiles
Our range of Avant Profiles has been developed over years of extensive research and development. Our profiles are functional solutions that greatly improve the quality of finish to flooring, while remaining easy and efficient to install. Avant Profiles are made with highly durable die-cast aluminium which stands up against every day wear and tear. That’s why Engineers, Architects and homeowners trust in Avant Profiles for that perfect finish.
ABP-01
Description: This is a profile used to finish or join two types of floors either of two colours, or of two materials e.g ceramic, marble, wood, parquets. The floor has to be on the same level. The profile is fitted with screws to the floor for a strong connection. A rubber beading is inserted onto the profile for a firm grip.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the profile so as
the screw hole comes in the centre of the joint. 4. Fix the
screw tight to the floor. 5. Insert the rubber grip beading to
the profile. 6. Degrease and clean the profile.
COLOUR:
Polished Brass
ABP-02
Description: This profile is used to hold the Signature Flooring tile firmly to the stairway or at any edge. This is also known as Stair Nosings. This profile is fixed at the outer edge of the stair step where the rise and step meet. The profile is fixed firmly to the step by screwing it to the floor. A rubber beading is inserted onto the profile for a firm grip.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the profile to the
edge of the step so as to hold the rise tile and the step tile
firmly together with the profile. 4. Fix the screw tight to the
floor. 5. Insert the rubber grip beading to the profile.
6. Degrease and clean the profile.
COLOUR:
Polished Brass
ABP-03
Description: This profile is used to finish the open ends of the finished Signature floor. This profile is also known as the “C” profile. This profile is fixed by gluing it to the Signature floor.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the profile to the open
edge of the finished open area of the floor so as to cover the
hollow sides of the tile. 4. Fix the profile by gluing it to the floor.
5. Degrease and clean the profile.
COLOUR:
Polished Brass
ABP-04
Description: This profile is to close the gaps and joints of two tiles at the junctions where two rooms meet. This profile is also known as “T” profile. This profile is fixed by gluing the gaps and pressing the profile down to the Signature floor.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the profile at the
space to be filled. 4. Use glue to hold the profile firmly.
5. Place some weight till the glue sets. 6. Degrease and
clean the profile.
COLOUR:
Polished Brass
ABP-05
Description: This profile is used to hold the Signature Flooring tile firmly to the stairway or at any edge greater than the one shown in ABP-02. This is also known as Stair Nosings. This profile is fixed at the outer edge of the stair where the rise and step meet. The profile is fixed firmly to the step by screwing it to the floor. A rubber beading is inserted onto the profile for a firm grip.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the profile to the
edge of the step so as to hold the rise tile and the step tile
firmly together with the profile. 4. Fix the screw tight to the
floor. 5. Insert the rubber grip beading to the profile.
6. Degrease and clean the profile.
COLOUR:
Polished Brass
ABP-06
Description: This profile is used to finish Signature Flooring and close the ends of the Signature Flooring to the different existing floor (to a lower level). This profile is also known as a “Reducer” profile. This profile is fixed by screwing the profile to the floor and pressing the aluminium cover down.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the straight side of
the profile to the finished Signature floor area and the slope
side of the profile to the existing floor of a lower level.
4. Fix the profile by screwing it firmly to the floor.
5. Degrease and clean the profile.
COLOUR:
Polished Brass
ABP-07
Description: This profile is used for joining and finishing where the Signature floor meets with carpeted areas. The profile is fixed by placing it to the level side of the Signature floor and screwed to the floor and the carpet is locked to the profile. This profile is also knows as “Carpet close in” profile.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. 3. Place the “T” side of the
profile to the side of the Signature floor and screw it firmly
to the ground and place the carpet to the hooked side of
the profile and lock it. 4. Fix the profile by screwing it firmly
to the floor. 5. Degrease and clean the profile.
COLOUR:
Polished Brass
ABP-08
Description: This profile is used for stairways. This profile is glued to the inner comer of the stairways where the raise and steps meet.
Method to Install.
1. Cut the profile to the required length. 2. Remove the
protective film from the profile. Place the curved side of the
profile facing out. 3. Fill the joints with glue and press the
profile down and hold down for the glue to fix firmly.
4. Fix the profile by screwing it firmly to the floor.
5. Degrease and clean the profile.
COLOUR:
Polished Brass
WATCH THE VIDEO
E-Brochure